![]() The number of cans you need will also depend on how big your boat is! In the end, I needed approximately 12 cans of primer and 18 cans of lacquer, but this is partly because it's super windy where I live (on Lake Superior). Let the inside cure in the sun for a few days (but always cover it at night to protect from rain).Ī few days later, we took her for a spin and dragged her up and down some sandy shores and the paint held up perfectly! But boats see a lot of wear and tear, getting dragged up on rocks and trailers and, as one neighbour put it, “trading paint with other boats.” That's why my all-turquoise paint job is perfect: I can easily touch up any chips or dents without worrying about overspray. When the boat interior is primed, apply the lacquer – making sure you overlap with the exterior paint job and don’t leave any sections unpainted. Once dried, start applying the primer, working in small sections. The frustrating thing about painting a boat is how much debris would float into it while I was trying to prime and paint, so I kept my shop vac on hand. Once the inside is clean, let it dry overnight – covering with a tarp at night to protect from a surprise overnight rainfall. I didn't use a pressure washer for the inside, because a pressure washer can push too much water into wood (and my seats are wood), delaying dry time. I vacuumed, sanded with my drill attachment, and washed it in one afternoon. The inside needed a lot of scrubbing and some sanding also, to remove loose paint. Use a shop vac to remove all of the debris that had settled inside (like leaves and sand). Once you finish spraying, let the boat cure a few days before carefully flipping it over on its trailer. Multiple thin coats work better than one thick coat. Again, work from the bottom up and spray in smooth, even strokes. When the primer dries, apply the turquoise lacquer. The primer can be top coated in half an hour, so the boat exterior could be totally painted in the course of one sunny day! Next apply the primer, working from the bottom up, spraying in smooth, even strokes. Dish soap works just fine, too! I finished the deep clean with a pressure washer and let the boat dry for a day. ![]() You can use a soap intended for cleaning boats – there are many biodegradable options designed to remove algae and other lake goo. Give the exterior a really good scrub, beginning with a sanding pad that can attach to a drill (I found it in the automotive section and it's designed to sand paint from vehicles) to remove loose paint and dried-on algae, and then follow up with a thorough wash. I worked on the boat in stages, tackling the outside first and then flipping it over to work on the inside. Because we park the boat on the lawn all year round, I wanted to give it a new makeover that would match the house exterior. Last summer my husband and I were given a cute little aluminum boat by my father-in-law.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |